- November 8, 2019
- Posted by: Tooling
- Category: Rapid Tooling
If you need to mass produce the same plastic product, injection molding is your first choice. This low-cost process can produce high-quality parts in large quantities.
But do you know the material and process of injection molding? JasonMould takes you to the next 5 options for custom injection molding benefits.
1. Product customization: change to the color or type of material you want to use. Other additives can also be added to enhance the finished part and even other characteristics, such as flexibility or UV resistance.
2. Fast production speed: the cycle of injection molding is usually only 15 to 30 seconds, so a large number of products can be produced very quickly.
3. High cost performance: the speed and efficiency of customized injection molding means lower cost, so you can save budget.
4. Environmental protection performance: customized injection molding only uses the required amount of plastic, and any tested or abandoned parts can be recycled. There is no unnecessary waste.
5. Reduce assembly time: when you take the product out of the injection mold, it is usually the finished product, and no further finishing is required, unless you need secondary processing.
About JasonMould Industrial Company Limited
Jasonmould is a China mold maker of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer, mold manufacturer China– plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.
Contact:
Person: James Yuan
Company: JasonMould Industrial Company Limited
Add: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Tel: 86-752-6682869
Email: [email protected]
Site: https://www.jasonmolding.com/custom-injection-molding/